Clear Wood Finish Brushing Lacquer
Brushing Lacquer
America's finest brushing lacquer gives a deep rich appearance to interior wood surfaces including, furniture, cabinets, molding, antiques and crafts.
Advantages
What's special about Clear Wood Finish Brushing Lacquer?
- Dries in 30 minutes recoat two hours
- No need to sand between coats
- Dries crystal clear
- Self leveling formula means no brush marks
- Easy touch up - new coat melts into previous coats
- Resists water, alcohol, and other common household spills
- Convenient aerosol can with adjustable spray valve
Online Retailers
Can't find this product in your local store? Did you try our online retailers?
Doug's Supplies (Link)
1-800-777-3684
Woodcraft Supply (Link)
1-800-225-1153
Rockler Woodworking Store (Link)
1-800-279-4441
The Paint Store (Link)
1-800-456-0966
Holfter GmbH - Germany Violins (Link)
02402 12654-0
Frequently Asked Questions
Some frequently Asked Questions regarding Clear Wood Finish Brushing Lacquer
Q. Why do I get bubbles in the top coat?
A. There are a few explanations on how bubbles develop in a top coat. The product was shaken rather than stirred. The product was over worked, with excessive brushing or rolling. In the case of a lacquer based product, working in direct sunlight will cause solvent popping which forms bubbles in the top coat. To remove bubbles, sand lightly and apply an additional coat.
Q. What happens if I get a run in my top coat?
A. Runs and drips can happen when the top coat is applied too thick. To avoid runs and drips and for best results, apply several thin coats. To remove a run or drip, sand smooth and apply an additional coat.
Q. What happens if I get dust/particles in my top coat?
A. Sand lightly, remove all dust/particles and apply a new thin coat which will dry quicker and give dust/particles less time to settle in the wet film.
Q. Why do I need to shake an aerosol can?
A. You shake an aerosol can to disperse the flattening agents in semi gloss, satin and low luster top coats. You will hear the marble doing its job as you shake the can. Since there is no flattening agent in gloss top coats, a marble is not added to the can.
Q. Do you need to sand between coats of Clear Wood Finish Brushing Lacquer?
A. No, one of the great features of Clear Wood Finish is its ability to melt into the previous coat, forming a chemical bond. This speeds up finish time and makes repair and touch-up easier than oil and acrylic polyurethane and varnish.
Q. Can Clear Wood Finish Brushing Lacquer be touched up or repaired?
A. Yes, one of the great features of Clear Wood Finish is it's ability to melt into the previous coat, forming a chemical bond. This makes repair and touch-up easier than oil and acrylic polyurethane and varnish.
Q. Can Clear Wood Finish Brushing Lacquer be applied over a water base or oil base polyurethane, varnish or paint?
A. No, if you apply lacquer over a polyurethane, varnish, or paint the solvents in the lacquer will cause the previous finish to lift or winkle. If you are uncertain about the existing finish, test Clear Wood Finish in an inconspicuous area.
All of our latest products
Unique oil modified formula penetrates deeply into wood pores enhancing the wood's natural beauty. Six wood tone colors and a tint base that can be used to create custom colors. Stain and top coat in just 1 day!
Using premium blends of rich oils, including Tung Oil, and radiant light fast pigments, this wood stain is designed to penetrate deeply into the wood imparting a rich even semi-transparent color, formulated to prevent pigment settling.
America's finest brushing lacquer gives a deep rich appearance to interior wood surfaces including, furniture, cabinets, molding, antiques and crafts.
Specially formulated to provide a fast dry, easy to sand initial sealer coat on any lacquer finishing project.
Self-crosslinking 100% acrylic technology offers many of the same features and benefits as our traditional CWF Brushing Lacquer in an environmentally friendly formulation. Excellent on furniture, cabinets, molding, antiques, crafts, and over faux finish.
This crystal clear Polyurethane is formulated with the latest water based Oil Modified Urethane technology. Ideal protection for interior and exterior wood surfaces.
A high solids oil based polyurethane formulated for hard use areas. Excellent for interior and exterior wood surfaces including floors, doors, furniture cabinets and marine applications above the water line.
An oil based polyurethane for interior wood surfaces including floors, cabinets, furniture, molding and trim.
A rich penetrating wood stain combined with a protective satin finish in a single, easy to use product. Excellent for interior wood surfaces including, floors, cabinets molding, railings, baby furniture, toys and crafts.
A penetrating tung oil urethane Danish oil finish. Our translucent formula brings out the natural beauty of wood, and does not mask the wood grain. Excellent for interior wood surfaces including, cabinets, furniture, floors and molding.
Exterior penetrating Danish Oil specifically formulated for hardwoods such as teak. Excellent for use on patio furniture, and marine applications above the water line.
Formulated to protect exterior wood surfaces from the harmful effects of rain and sun.. Seals and protects doors, gates, patio furniture, and picnic tables.
*Only Available in Canada* Floor Finish is an Interior Oil Modified Urethane Varnish. Floor Finish is based on proven technology used by Deft for many years. Use Floor Finish on stained or bare interior wood floors. Non-toxic when dry.
